[tut] how to run two maplestorys on one computer.

I, take no credit for this.
this is from CEF and all credit goes to Mitta and all the people who helped him.


[step1]
Step 1: Software that is needed.

Ok this is a easy step for most of us you aren’t a good cheater if you can’t search so if you can’t even search for this software beat it.

* 1. VMware Workstation 5.5.2
o You can download this from http://www.vmware.com/download/ws/
You will also need a serial which is R0WR4-KRLFA-DCNCC-4MAFP
2. Next on the list is Windows XP. How to get this isn’t hard.
3. You also need the newest driver software for your graphics card. Commonly used are:
o NVIDIA drivers are available at www.nvidia.com/content/drivers/drivers.asp
ATI drivers are available at www.ati.com/support/driver.html


That’s all folks lets to the step 2

[step2]
Step2: Prepare your host computer for VMware Workstation.

Okay this is the first actual step that you will perform some things.
You have downloaded the newest driver in step 1.
Now it’s time to install this driver.

After you have done this perform these steps to prepare a Windows 2000 or Windows XP host.
Make sure hardware acceleration is turned up in the display properties.
1. Right-click the desktop and choose Properties > Settings > Advanced > Troubleshoot.
2. Move the Hardware Acceleration slider all the way to the Full position.

That’s all for step 2 not that hard.

[step3]
Step 3: Install VMware Workstation.

This one cant be hard either you have now prepared your host system for VMware Workstation and it is time to install it.

Start the installation file and follow the steps most of it is clicking next in zombie mode not to hard.

Okay that was step 3 your done… just joking lets go to step 4

[step4]
Set up a new Virtual PC.

Okay now that you installed VMware Workstation you have to set up a new Virtual PC.

I have chosen for windows xp professional but you can also use windows xp home and windows 2000 workstation. (other windows systems wont work.)


If you see a screen that i haven't posted it is unimportant what you can choose there and therefor you just have to click next when you see them .

Now on to step 5

[step5]
Step 5: Install a Operating System on your newly made Virtual PC

Insert your installation disc of windows in your cd/dvd drive.
Select your newly made Virtual PC.
And click Start this virtual machine.
Make sure your working in the Virtual PC.
And press escape to go to the boot system.
There you have to choose “CD-ROM Drive”.
After that your windows installation will boot up.
This won’t be to hard just follow the steps on your screen to install Windows.
After you have installed Windows, shut down your Virtual PC and close VMware Workstation.

Now go to step 6.

[step6]
Step 6: Change the Configuration file of your Virtual PC.

Okay in this step we are going change the Virtual PCs configuration file to enable the experimental 3D graphics card.

1] Open My Computer
2] Go to Tools > Folder Options
3] Select the View tab.
4] Look for Hide Extensions for known File Types. (No need for scrolling)
5] Disable Hide Extensions for known File Types and hit ok.

Go to c:\MSvirtual\ or any location that you stored your Virtual PC when you made it with the wizard.
There right click the .vmx file in my case that is Windows XP Professional.vmx .
(the .vmx file is always named to the operating system you have installed on your host system.)
And choose open with…
Then you choose notepad and click on open.
Now insert the following lines after: nvram = "Windows XP Professional.nvram" :
Code:

mks.enable3d = TRUE
svga.vramSize = 67108864
vmmouse.present = FALSE

After you did this save the file.
Then start VMware Workstation.
Go to Edit > preferences
Choose the tab: Input
Then deselect the option Ungrab when cursor leaves window..
Then press okay

Now your done with step 6.

[step7]
Step 7: Install VMware tools on your Operating System of your Virtual PC

Now we are going back to the Virtual PCs operating system.

First boot your Virtual PC
Then after it has booted choose vm>install VMware Tools… in the VMware Workstation.
Then choose Install
Now you will see that a installation program starts on your Virtual PC.
Choose next > select “complete” > next > install > finish
Then choose yes to reboot your Virtual PC.
After that install DirectX 9.0C
Do this by going to http://www.microsoft.com/downloads/d...DisplayLang=en
A windows validation is required.

Okay your done now happy double mapling .